InsaneJim69 1584 Posted December 12, 2016 Reluctantly I am putting up for sale my gorgeous Porsche 911 GT1, which has been hopped up beyond TRF spec with almost every single TA03 Hop Up imaginable including some nice rare official Tamiya hex head hardware too. It has never been ran in its current state with the only used parts being the Eurethane front bumper, some hop ups (that have been cleaned up) and some plastic parts. Most of the plastics are the rare black type with only a few small parts using the original grey ones. The body is new built and never ran, it was cut, painted and decalled by myself to a pretty good standard (as can be seen by the pictures). What you see is what you get and I will list below the extensive hop ups that have been used, some of which are ultra rare to find these days. So what you get ........ is a TA03R-S chassis that has had the following fitted, 53387 - TA03R-S FRP Chassis Conversion (part J5 has been replaced with some alloys spacers) 53386 - TA03R-S Carbon Chassis Plates. 53267 - TA03 Ball Diff (fitted to the rear) 53200 - 4WD Front One Way Diff (fitted to the front) 53326 - TA03 Alluminium Steering Set 53274 - TA03 Aluminium Counter Shaft 53200 - TA03 Universal Swing Shafts (Blue) 49091 - TA03 Lightweight Drive Shafts Purple (fitted to the rear) 53279 - TA03 Torque Splitter Unit 53261 - TA03F Pro Carbon Battery Plate Set 53276 - TA03 Fluorescent Colour Stabilizer Set 53163 - On Road Spring Set 53333 - Touring Car Tuned Spring Set (short type) 53337 - TA03 Reinforced Damper Stay (low mount type) x2 49093 - Aluminium Servo Stay (purple) 53275 - TA03 Aluminium Motor Heat Sink 53288 - TA03 Aluminium Rear Uprights 53316 - TA03 Aluminium Hub Carriers 53293 - Reinforced Slicks Type A x2 53571 - TRF Flourine Coated Dampers (1 has a slight mark on the top cap) 53291 - TA03 15T Aluminium Pulley x2 TA03 Pro 0.4 Module Gear set I have used alot of 3 Racing Purple Hardware on the build too. New built Tamiya Porsche 911 GT1 bodyset, with wheels and inserts I am sure I have missed out a few items, also comes fitted with full bearings, Almost complete spare decal set for the 911 GT1, Full spare plastic parts for the 911 GT1, original kit box, scanned manual (sorry I don't have the original manual) and a few other spare parts that I have for the chassis. Also included are most of the Hop Up labels/packaging that I have kept over the years of collecting the parts to build this. Any questions at all, please feel free to ask. Also any other pictures wanted, again please ask. I would like to see it go to a good home and not someone who is going to sell it on preferably. UK buyer preferred, but may post overseas at cost (the box will be quite heavy) and double boxed packaging Looking for £160 (includes UK postage). Many thanks James 2 Share this post Link to post
Nitomor 2122 Posted December 13, 2016 What a beauty, good luck with the sale Share this post Link to post
InsaneJim69 1584 Posted January 14, 2017 Bump, still for sale !! James . Share this post Link to post
svenb 3778 Posted January 14, 2017 I can't believe this hasn't sold if I had the cash I would grab it. sven Share this post Link to post
Shodog 1835 Posted January 17, 2017 I like how you built that chassis and I'm interested. Are the chassis plates new? Share this post Link to post
firefoxussr 482 Posted February 3, 2017 Aww need to put mirrors on my GT1. Next build! Share this post Link to post