Lebowski 38 Posted January 29, 2017 I'm trying to find polycarbonate paint pots (brush paint) but having no luck at all. I've tried the usual avenues of eBay and amazon, Modelsport, Wheelspin and many more. My local model shop is next to useless so I'm really stuck with where to go! Any advice or does anyone have any pots they would be willing to sell? Black in particular! Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted January 29, 2017 I have a few spare jars - what colours are you looking for ? Might have 1 jar of black spare. Assume you are also in the UK as could be a problem to post these abroad. Share this post Link to post Share on other sites
Fuijo 880 Posted January 29, 2017 I haven't tried it yet, but I mean to soon. I suspect it's possible to first decant the PS spray, and then use Tamiya Polycarbonate body-cleaner as a thinner/brush cleaner. Decanting is really easy through one of those bendy drinking-straws into a small glass container, which I usually apply with a cocktail stick for tyre lettering. The polycarbonate cleaner does soften and remove the PS paint. So as long as it cleans up the brushes ok, it should work. You could always do a test with an old or cheap brush. Share this post Link to post Share on other sites
Lebowski 38 Posted January 29, 2017 1 hour ago, Tamiyabigstuff said: I have a few spare jars - what colours are you looking for ? Might have 1 jar of black spare. Assume you are also in the UK as could be a problem to post these abroad. Yes, I'm UK - Lincolnshire. Black is the main one I'm after but a white, silver and blue would be awesome too! Just let me know your prices and i will sort it out. Such a shame Tamiya stopped making the jars and just switched to spray only. Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted January 29, 2017 Which blue ? There is a bright blue, a dark blue and a metallic blue from memory. Share this post Link to post Share on other sites
Mokei Kagaku 2706 Posted January 29, 2017 4 minutes ago, Tamiyabigstuff said: Which blue ? There is a bright blue, a dark blue and a metallic blue from memory. In pots: PC 3 Light Blue (which is indeed light "baby" blue) PC 4 Blue (which is actually dark blue) PC16 Metallic Blue (Bright blue (named Brilliant Blue by Tamiya) is a "neutral"/normal blue (most wouldn't call it "light" or "dark") and available as spray only: PS30) Share this post Link to post Share on other sites
Lebowski 38 Posted January 29, 2017 45 minutes ago, Mokei Kagaku said: In pots: PC 3 Light Blue (which is indeed light "baby" blue) PC 4 Blue (which is actually dark blue) PC16 Metallic Blue (Bright blue (named Brilliant Blue by Tamiya) is a "neutral"/normal blue (most wouldn't call it "light" or "dark") and available as spray only: PS30) Ah yes, sorry! PC4 ideally, 16 failing that. Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted January 29, 2017 OK, just had a look - I have black, white, silver and metallic blue. Also have loads of copper, orange, bright green & purple if you are interested. Probably have about 60 jars of PC paint in total. Share this post Link to post Share on other sites
Lebowski 38 Posted January 29, 2017 Yeah that all sounds good to me! Let me know how much you want and message me with some details and I will get a payment to you. Cheers. Share this post Link to post Share on other sites
Tamiyabigstuff 832 Posted January 29, 2017 You have PM. Share this post Link to post Share on other sites
WillyChang 1814 Posted January 30, 2017 PC bottles are nice consistency when fresh; Kyosho & MrColor had bottles too way back when. These days Fascolor, Createx and Vallejo acrylic paints can be handbrushed on too; avoid hand painting metallics & micas in huge areas as they'd show brushstrokes but otherwise they'll stick to clean scuffed lexan well enough. Share this post Link to post Share on other sites
SNAKEBITE 40 Posted February 1, 2017 Back in the80's I painted my old Falcon body with the Tamiya paint from a pot, and assumed it would be the same today. No, spray cans were all they had. I preferred the pots to be honest, lot less hassle! Share this post Link to post Share on other sites
mongoose1983 3335 Posted February 1, 2017 4 hours ago, SNAKEBITE said: Back in the80's I painted my old Falcon body with the Tamiya paint from a pot, and assumed it would be the same today. No, spray cans were all they had. I preferred the pots to be honest, lot less hassle! Duratrax and Parma Faskolor is what I use. I love Faskolor-in terms of quantity and quality is totally bang for the buck! Share this post Link to post Share on other sites
WillyChang 1814 Posted February 1, 2017 4 hours ago, mongoose1983 said: Duratrax and Parma Faskolor is what I use. I love Faskolor-in terms of quantity and quality is totally bang for the buck! used to be more colours before, in Fascent & Faschange Share this post Link to post Share on other sites
Lebowski 38 Posted February 2, 2017 On Sunday, January 29, 2017 at 9:53 PM, Tamiyabigstuff said: You have PM. Thanks for the paints, they arrived today in very sturdy packaging! 👍 1 Share this post Link to post Share on other sites
cliffw0970 49 Posted July 5, 2019 I'm trying to source PC12 Silver for Hornet roll cage, struggling to get a pot paint. Too late to spray as I've already laid the black down, if id thought about it I could have bought a can of silver, masked and sprayed the roll cage and then the black on top. The stickers aren't going to cut it for me, look fiddly and not sure about longevity. Anybody know where I can get one or want to sell a pot? Thanks, Share this post Link to post Share on other sites
topforcein 1764 Posted July 5, 2019 5 hours ago, cliffw0970 said: I'm trying to source PC12 Silver for Hornet roll cage, struggling to get a pot paint. Too late to spray as I've already laid the black down, if id thought about it I could have bought a can of silver, masked and sprayed the roll cage and then the black on top. The stickers aren't going to cut it for me, look fiddly and not sure about longevity. Anybody know where I can get one or want to sell a pot? Thanks, i know my lhs keeps the full tamiya range of paints in i dont know if they have it in stock as i aint been there in a long time they do have a web site and i presume they post also. http://www.pennmodelsrc.co.uk/pennmodels/index.asp Share this post Link to post Share on other sites
cliffw0970 49 Posted July 5, 2019 1 hour ago, topforcein said: i know my lhs keeps the full tamiya range of paints in i dont know if they have it in stock as i aint been there in a long time they do have a web site and i presume they post also. http://www.pennmodelsrc.co.uk/pennmodels/index.asp Spot on thanks, I will give them a call in the morning. Share this post Link to post Share on other sites
Mokei Kagaku 2706 Posted July 5, 2019 10 hours ago, cliffw0970 said: I'm trying to source PC12 Silver for Hornet roll cage, struggling to get a pot paint. Too late to spray as I've already laid the black down, if id thought about it I could have bought a can of silver, masked and sprayed the roll cage and then the black on top. The stickers aren't going to cut it for me, look fiddly and not sure about longevity. Anybody know where I can get one or want to sell a pot? Thanks, If I understand correctly, you intend to paint the cage on the outside of the body? If so, it may be useful to inform that the metallic Tamiya bottle paints are generally unsuitable for brush painting as the metallic particle will line up with the brush strokes and not be randomly oriented like when spray painting and this is even worse when painting on the outside instead of the inside. Also, the different Tamiya PC-paints (bottled lexan paints) don't all behave the same way and silver is among the more problematic ones with regard to coverage and even surfaces. If you haven't removed the protective film from the body yet, I would suggest scoring the edges of the roll cage with a very sharp scalpel and minimum force, then peel off the film from the roll cage areas and spray paint silver. Like many others, I use the protective film as "masking tape" this way for details that I want to or have to paint from the outside. It doesn't work well for all brands of bodies, but with Tamiya bodies, I have only positive experiences doing it this way. Share this post Link to post Share on other sites
WillyChang 1814 Posted July 6, 2019 Loved the Tamiya Paint Markers, especially their chrome silver - not really shiny chrome just dull silver but it covered pretty well enough to be a 1-shot job. Wonder when T stopped making them haven't seen them in yonks. These days I go looking in the Gundam modelling supplies instead. Share this post Link to post Share on other sites