Jason1145 3986 Posted August 21, 2017 21 minutes ago, topforcein said: i only have this pic to hand at the moment but if you need i can take a few more. i love the colour on it Omg another shell to add to the list, thanks for that. 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 21, 2017 So here is the chassis extension piece fitted.... This means I have to buy another M03 chassis to fit the Mini Cooper shell on ;p But for now... here's the pigs ear I made of my BMW 225mm shell.... all due to me rushing the whole job, not properly washing out the shell, trying to eek out the last remnants of a white can of paint and it spat blobs out..... well you can see the results below! White already on the front section and red on the middle... Lastly the purple... similar to Topforcein's shell above... a nice colour Painting and now drying the black spoiler All looks good..... the chrome front light buckets came out well too Here's the big reveal...... poop! Awful! Well.... I'll fit the light buckets, stick the rear bumper on and the spoiler as I've done them now but the jam has well and truly been taken utta my doughnut with this effort... it'll make a basher shell and when I can face it I'll buy another BMW shell and do it properly next time.# 1 1 Share this post Link to post Share on other sites
Kingfisher 1171 Posted August 21, 2017 Doesn't look too bad. Are the splatters / swirls only on the roof? You could take a big black vinyl sticker and cut it to cover the roof section. Another idea. Roof rack. https://hobbyking.com/en_us/1-10-roof-rack-black-with-oval-spotlights.html 1 Share this post Link to post Share on other sites
Nobbi1977 1793 Posted August 21, 2017 Matt black vinyl on the bonnet and roof and it will look like an club racer 2 Share this post Link to post Share on other sites
Badcrumble 4204 Posted August 21, 2017 I said you'd finish before me - there was no need to rush! Probably better than my first paint job will be - if I ever get round to it... 1 Share this post Link to post Share on other sites
topforcein 1764 Posted August 22, 2017 that looks great i did a similer job on a el camino shell for my t-maxx about 14 years ago. thats one shell i wish i never sold. if you don't want to use black vinyl on the roof try a carbon effect sticker instead. oh and where did you get that can of custom colours paint from as that is what i always used until my lhs stopped stocking it my fav colour they made was the blue to green flip i have that colour on my revo shell and my wild willie shell also. 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 23, 2017 Thanks for the suggestions guys, very creative... however I've decided this will be my runner shell now so it can get banged up a bit. I did fit front led's to it though which was a bit silly, but good practice as I haven't done that in a while with the light buckets. Ive fixed the rear bumper on ( two piece job if you go for rear leds too) but won't fit leds! decals applied and all finished now... too it for a run down the park and it goes great... pics to follow later... sorry Crumble I beat you to the finished job 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 23, 2017 and my little monster testing out the new shells rigidity 6 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 30, 2017 Took my M03 out today to terrorise a Scooby 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 30, 2017 Then ran it around the car park,I really like this little car with it's very predictable handing characteristics, it's good to be able to get the power on quickly without fishtailing out all the time... it just drags itself along spinning merrily Share this post Link to post Share on other sites
Jason1145 3986 Posted August 30, 2017 Slow Mo epileptic fit video.... do not watch it flashing lights hurt your eyes.. sorry 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted August 30, 2017 This M03 is the undisputed KING of the J-TURN! 4 Share this post Link to post Share on other sites
TeaMonster 506 Posted August 30, 2017 Great looking body that is 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted September 15, 2017 And now I bought another M03, this makes 2 now, thanks to @NameUnchanged for an easy transaction selling me this roller 4 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted September 17, 2017 As with any roller there are always a few niggles, the rear left wheel was suspended in mid air when sat on the floor, ont a result of a shock now fully extending and being shorter than the others.. as these were only pogo sticks it was due for replacement anyway. It came with bearings fitted so that's a plus I found some short alloy oil filled ones, getting the hardware together to install them always takes me longer to find in my spares, must organise bits properly Then I fitted a brushless motor (unknown kv rating.... was an old one O never fitted before and lost the packaging) And a hobbypower 60a esc Bench testing it showed some movement from the dog bones so I tried to wedge them n a bit... they already had a rubber O-ring but it wasn't enough, some fuel tubing helped here Some red wheel nuts to match the wheels... but these wheel will be replaced as they are pretty banged up and won't hold glue if glued down And finally with TopForcein's Red shell done really nicely (I bodged the silver wheel arches myself) My two M03's - 210 MIni and 225 BMW 2 Share this post Link to post Share on other sites
topforcein 1764 Posted September 17, 2017 thats a sexy shoot of the back of the mini it looks good lol 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted September 17, 2017 I know what you mean, it's the wide looking wheels sticking outside the main body line.. they look fat! Share this post Link to post Share on other sites
Badcrumble 4204 Posted September 17, 2017 3 hours ago, Jason1145 said: I know what you mean, it's the wide looking wheels sticking outside the main body line.. they look fat! They look great, super on a Racing Mini. I'd like something a little more scale for a boggo Mini City so thought I'd try thinner hexes to bring the wheels in. Arches will need trimming too <gulp>. Wheels themselves will still be too wide but I don't fancy trimming them or the tyres down. Not sure I'll be able to get the shell the right shade of dull Austin Red but as Mrs 'Crumble had an Advantage I could just paint it white... I like your silver arches tying into the roof. Enjoy! Share this post Link to post Share on other sites
Jason1145 3986 Posted October 2, 2017 Ready.. steady..... Go 1 Share this post Link to post Share on other sites
Jason1145 3986 Posted October 2, 2017 And this.... 2 Share this post Link to post Share on other sites