Tamiya Frog steering rods

[StueyS 41]

Hi guys. I want to replace the steering rods on my re re Frog with modern 3mm sized turnbuckles and centralize the servo. I am not sure what ball joint ends will fit on the steering arms and work with a 3mm turnbuckle. The kit white ones are a bit small to accommodate a 3mm hole I would think. Any suggestions please? 

[MAD RACER 566]

Plenty of ideas and variations on the Tamiya club. 

Did you do a search before posting?

[StueyS 41]

Yep, what I need is some ball joint ends that will fit onto the stock steering arms, and take a thicker steering rod. I am not sure what the steering arm ball size is, so if anyone has done this it would be good :-)

 

[StueyS 41]

Thanks for the pics, that's what I am aiming for. I think these ball ends should fit the ball joints on the steering arms and let me use the turnbuckles. 

https://tamiyabase.com/index.php?option=com_joodb&view=article&id=7406&joobase=10&Itemid=775

 

[njmlondon 570]

These fit on 3mm turnbuckles and fit the frog 2.6mm balls.

http://www.ebay.co.uk/itm/253004678710

 

[StueyS 41]

Thanks, same as the ones I posted a link too.