Springs for the WT-01 with tall damper stays

[Kingfisher]

I'm having trouble finding a set of springs for the WT-01. I've done the 4x4 conversion and have the tall damper stays. Everything I have tried so far is too soft for the weight of it. I'm using Tamiya oil shocks. Any suggestions for springs?

 

[Juggular]

How about T-Maxx shocks? 

I got them for Konghead.  Shock tower might be the same.  Arms are a different kind of long-arms.  But T-Maxx shocks might work for WT01. 

  

[Kingfisher]

4 minutes ago, Juggular said:

How about T-Maxx shocks? 

I got them for Konghead.  Shock tower might be the same.  Arms are a different kind of long-arms.  But T-Maxx shocks might work for WT01. 

 

Thanks. I'll see if I can find the springs for those.

[wolfdogstinkus]

I was going to suggest TGM-02 shocks, they will be similar to T-maxx, I have both and could check fitment later.

Keep it Tamiya though.

[ThunderDragonCy]

Team Losi truck springs fit. LOSA5160 blue springs are off their trucks and are stiffer than anything tamiya makes. I have some for CVAs on a vintage buggy which runs 8.4v nimh.

[zomboided]

I've used t-maxx shocks, but am now on the gmade piggyback shocks.  In hindsight the t-maxx shocks (and springs) were fine, I didn't get much of an improvement with the gmades.

[taffer]

i used tamiya cva with df03 hopup spring set, hard springs with thickest spacer, seemed great at the time