_oliK 108 Posted November 21, 2018 Well the 11 spokes that you found are probably the closest you'll get to the real ones. Share this post Link to post Share on other sites
geniusanthony 361 Posted November 22, 2018 Post an image I can make some in CAD Share this post Link to post Share on other sites
Boddney 162 Posted November 23, 2018 Thanks @geniusanthony but the 11 spokes will be ok for now. I’ll keep you in mind if I go for full on replica.  Share this post Link to post Share on other sites
Boddney 162 Posted November 23, 2018 @Badcrumble you’re going to have to apologise to Mrs Boddney for your inadvertent suggestion back on page 1. Look what arrived. 3 1 Share this post Link to post Share on other sites
TurnipJF 9192 Posted November 23, 2018 Nice looking shell! What scale is that, and which chassis is it gong on? Share this post Link to post Share on other sites
Badcrumble 4204 Posted November 24, 2018 12 hours ago, Boddney said: @Badcrumble you’re going to have to apologise to Mrs Boddney for your inadvertent suggestion back on page 1. Look what arrived. #sorrynotsorry - this will be great! Share this post Link to post Share on other sites
Boddney 162 Posted November 24, 2018 17 hours ago, TurnipJF said: Nice looking shell! What scale is that, and which chassis is it gong on? It’s a 1/10. It goes on a TT-01 or TT-02. Just need to find a cheap one now if anyone knows of one going. Doesn’t matter if it’s a non runner. This one’s going to be a Shelfer. Share this post Link to post Share on other sites
Boddney 162 Posted November 24, 2018 6 hours ago, Badcrumble said: #sorrynotsorry - this will be great! 😂 Love it. Thanks. Share this post Link to post Share on other sites
TurnipJF 9192 Posted November 25, 2018 21 hours ago, Boddney said: It’s a 1/10. It goes on a TT-01 or TT-02. Just need to find a cheap one now if anyone knows of one going. Doesn’t matter if it’s a non runner. This one’s going to be a Shelfer. Check Tamico under the Sale section. You can get a bagged chassis kit for under £40, quite the bargain I think. 1 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted November 25, 2018 2 hours ago, TurnipJF said: Check Tamico under the Sale section. You can get a bagged chassis kit for under £40, quite the bargain I think. Totally agree, a first try TT02 goes for under 50€ On tamico. I always check from time to time www.t2shop.de they have a used section and I bought my Xray T1FK05 there for 30€, and a M05 on sale for 39€, they also offer a FF03 for 79€ kit only. another sale offer from them is a Xray T4 for 500€ and for free you get a TT02   Share this post Link to post Share on other sites
Boddney 162 Posted November 25, 2018 Thanks guys that’s a brilliant heads up. Just need to wait for a restock. 1 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted November 25, 2018 Bottom left? TT02 with ball bearings and CVA oil dampers Share this post Link to post Share on other sites
TurnipJF 9192 Posted November 25, 2018 A bit more expensive than the bargain basement TT-01, but still a very good price, and comes with 2 out of the "Big 3" important upgrades you'd need if you ever wanted to make it a runner. Share this post Link to post Share on other sites
Superluminal 3750 Posted November 27, 2018 Whats the 3rd? Share this post Link to post Share on other sites
TurnipJF 9192 Posted November 27, 2018 6 minutes ago, Superluminal said: Whats the 3rd? Steel pinion. In addition to plastic bushings instead of bearings and pogo sticks instead of dampers, most hobby grade Tamiyas come with a soft alloy pinion which wears fast, accelerating wear to the spur. A hardened steel one is a worthwhile upgrade, best fitted at the outset so that you don't get a gearbox full of grey grease contaminated with decomposing alloy pinion after the first few runs.  Share this post Link to post Share on other sites
Boddney 162 Posted January 17, 2019 Ok so I’ve made a start on the GT86 and once again there is a picture just for you @Jason1145. I made my usual little cockup on the front. It seems to be a party trick of mine. 3 shells cut and 3 shells cocked up on the front valance. Never mind, another little bit of character and a very er.... skill-full repair (cough cough)  3 Share this post Link to post Share on other sites
Jason1145 3986 Posted January 17, 2019 1 hour ago, Boddney said: Ok so I’ve made a start on the GT86 and once again there is a picture just for you @Jason1145. I made my usual little cockup on the front. It seems to be a party trick of mine. 3 shells cut and 3 shells cocked up on the front valance. Never mind, another little bit of character and a very er.... skill-full repair (cough cough)  Now you see it... now you don't, it's like car thieves have lifted your car body and left the wheels... which is the reverse of returning to finding it stlll there but on bricks minus the wheels. I can't see the front valence and the repair pls explain, and great cutting out on the rear section Share this post Link to post Share on other sites
Boddney 162 Posted January 17, 2019 The slice in the valance is in picture 6 with the masking tape behind it. I put the tape on the inside and fed superglue into it using the blade of the craft knife. Best I could do really. I just hope it doesn’t show to much after painting. Share this post Link to post Share on other sites
Jason1145 3986 Posted January 17, 2019 Ah I see said the blind man, I'd have painted it first then tried to glue it together.... for fear of getting glue in the way but both ways are total bodges lol and yours might work better... try my way on the 4th shell you do 😂 2 Share this post Link to post Share on other sites
Boddney 162 Posted January 18, 2019 I may do a Lexus GS300 next then that will be all my real fleet reproduced in miniature. Has anyone ever used this kit before? I’m just wondering how you’d attach the tail pipes and intercooler to the shell? Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted January 18, 2019 2 hours ago, Boddney said: I may do a Lexus GS300 next then that will be all my real fleet reproduced in miniature. Has anyone ever used this kit before? I’m just wondering how you’d attach the tail pipes and intercooler to the shell? Me has. You use the pipes and the right 3 small quadrats. With double sided tape and 1 screw. basically exhaust pipe, with screw to mount, mount with double sided tape body. Share this post Link to post Share on other sites
_oliK 108 Posted January 23, 2019 Some just use lads of glue. I've got a brace mounted to my chassis. It's 3D-printed but any bent wire would do the trick  Share this post Link to post Share on other sites
Scipunk 383 Posted January 24, 2019 Great job on the MR2 always loved those little cars, one of my friends has one and he babies it Looking forward to more from you! Share this post Link to post Share on other sites
Boddney 162 Posted February 3, 2019 I managed to get a second hand TT-01 locally to me and struck a fair deal for both parties. There are quite a few hop ups including a fixed front diff. I stripped, cleaned, re-greased and rebuilt it. Now looking for the most correct wheels that are available with a view to minor modifications to make them correct. The shell fits nicely. I’m going again with the stealth mounts. Here’s the piccys. Share this post Link to post Share on other sites