Cipo72 1 Posted February 1, 2019 Hello, I just assembled my first Tamiya (Grasshopper) and when I tested it the steering worked fine, the thrust no... led turns green on the ESC when I accelerate or reverse but engine receives no signal (and it is connected yellow/orange green/blue. specs: Receiver: FS-GR3E ESC: TBLE-02S Remote: FS-GT2B Share this post Link to post Share on other sites
AJB123 107 Posted February 1, 2019 15 minutes ago, Cipo72 said: when I tested it the steering worked fine, the thrust no... led turns green on the ESC when I accelerate or reverse but engine receives no signal (and it is connected yellow/orange green/blue. From the TBLE-02S instructions here it looks like you should be using ESC yellow for motor + (yellow on the motor) and ESC blue for motor - (green on the motor). Orange then shouldn't be connected. I know my re-re HotShot manual says to use ESC red or orange for motor +, not yellow, so I assume your Grasshopper manual might be the same, but I guess they don't know what ESC you're going to be using and the kit manual is trying to be generic. Not helpful though! Share this post Link to post Share on other sites
AJB123 107 Posted February 1, 2019 Enjoy your first Tamiya once it's working! 1 Share this post Link to post Share on other sites
Cipo72 1 Posted February 1, 2019 It works!!!! you are right, my instructions were wrong... thank you!! 1 Share this post Link to post Share on other sites