evssv69 378 Posted February 25, 2019 r there alternate shox end for the yellow cva`s???and the ones I got r not fitting correct..... Share this post Link to post Share on other sites
ringding350 9 Posted February 26, 2019 I used a DT-03 CVA kit on my Madcap. IIRC it had both 'long' and 'short' end fittings. I used the long ones to get clearance on the lower wishbone. 1 Share this post Link to post Share on other sites
evssv69 378 Posted February 26, 2019 Thks....looks like i need 4x longer shox ends then......as looks crap in the previous pics... Share this post Link to post Share on other sites
ringding350 9 Posted February 26, 2019 Did they not come in the kit? Share this post Link to post Share on other sites
evssv69 378 Posted February 27, 2019 On 2/26/2019 at 2:17 PM, ringding350 said: Did they not come in the kit? 2nd hand shox Share this post Link to post Share on other sites
ringding350 9 Posted February 28, 2019 Tamiya do a spare parts kit for the CVA shocks, Antics have it cheaper than on ebay here. Only in black but if it gets it running maybe that's good enough? You never know they might even have it in their Bristol store and it'd save the postage! Share this post Link to post Share on other sites
ringding350 9 Posted February 28, 2019 Actually this is a cheaper way of dong it, and there's one in stock in Bristol. Might be worth double checking the fitment though. I don't work for them BTW, it's just I'm off work sick and bored! 1 Share this post Link to post Share on other sites
max69vk 708 Posted March 1, 2019 On 2/25/2019 at 9:30 PM, evssv69 said: r there alternate shox end for the yellow cva`s???and the ones I got r not fitting correct..... Are you sure you’re not missing the spacers for the damper mounts, I’ve found a picture online of the side of the original Madcap box showing the hop-ups for the car & the dampers are the exact ones you have... 1 Share this post Link to post Share on other sites
evssv69 378 Posted March 1, 2019 Ahh...what do they look like?as u can see in the pic i posted it aint sitting right at all Share this post Link to post Share on other sites
evssv69 378 Posted March 1, 2019 On 2/28/2019 at 9:47 AM, ringding350 said: Actually this is a cheaper way of dong it, and there's one in stock in Bristol. Might be worth double checking the fitment though. I don't work for them BTW, it's just I'm off work sick and bored! Lol..cheers dude ....i can pop in today Share this post Link to post Share on other sites
evssv69 378 Posted March 1, 2019 On 2/15/2019 at 10:53 PM, evssv69 said: So jus put the cva's on.. But they don't seem to b sitting right here.. .thk it need the longer shox ends to clear the arms Here..but dont the orginal blue/red shoxs have the longer ends on them?if so then surly i need them on these? Share this post Link to post Share on other sites
ringding350 9 Posted March 1, 2019 Oh, I hadn't realised. Those yellow shocks are a different construction to the CVA's I've got. I don't think the parts I shared will fit. 1 Share this post Link to post Share on other sites
ringding350 9 Posted March 1, 2019 From the Madcap manual that I have: 1 Share this post Link to post Share on other sites
evssv69 378 Posted March 1, 2019 Looks like i need the longer ones....and i totally forgot to go to antics Share this post Link to post Share on other sites
mikiej 2 Posted March 4, 2019 The font tyres for this car are a nightmare to get hold off. If they are available they are expensive. Way too expensive for regular use. Instead grab the astute front wheels and rear wheels and slap on shumacher tyres. The ride is higher and helps with the steering. Tyres are 6 bucks or so. If i find out the size of the tyre ill update here. But yes i gave up ages ago with those discs. @evssv69 - are those shock missing the clips/spacers to compact the springs? and that's why its sagging? 1 Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 Ahh..dun know...u mean pre load spacers🤔 Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 Yes there missing ...but they still need thd longer ends though to sit right Share this post Link to post Share on other sites
GTodd 1349 Posted March 4, 2019 I have extra spring retainers and longer rods ends if you'd like em. Where do you live USA, UK,..... Measure your shocks eye to eye what are your measurements? Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 19 minutes ago, GTodd said: I have extra spring retainers and longer rods ends if you'd like em. Where do you live USA, UK,..... Measure your shocks eye to eye what are your measurements? Yes pls dude..I'm in uk btwlet me chk...front 64mm Rear 77mm Share this post Link to post Share on other sites
ThunderDragonCy 7881 Posted March 4, 2019 Are the wheels on this not 2" on this? Schumacher have released modern compound 2" tyres. Rib spike for front: http://www.racing-cars.com/pp/manufacturer/Schumacher/U6847.html Mini Spike 2" rear: http://www.racing-cars.com/pp/Product_Category/Wheels_Tyres_and_Inserts/U6849.html CAT Block Rear: http://www.racing-cars.com/pp/manufacturer/Schumacher/U6786.html 1 Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 not sure what the fronts r tbh........thks for the links.... Share this post Link to post Share on other sites
GTodd 1349 Posted March 4, 2019 2 hours ago, evssv69 said: Yes pls dude..I'm in uk btwlet me chk...front 64mm Rear 77mm Yikes you are waaaaaay off on the rear. The rears need to be about 85mm. Your front looks good for the length. 1 Share this post Link to post Share on other sites
GTodd 1349 Posted March 4, 2019 Have you taken apart the shocks to ensure there are no spacers inside? Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 9 minutes ago, GTodd said: Have you taken apart the shocks to ensure there are no spacers inside? nope...got em..fitted em.....sitting wrong... Share this post Link to post Share on other sites
evssv69 378 Posted March 4, 2019 12 minutes ago, GTodd said: Yikes you are waaaaaay off on the rear. The rears need to be about 85mm. Your front looks good for the length. I`m hopenig the longer ends will b enuff to make em fit/sit right... Share this post Link to post Share on other sites