ACCEL 2014 Posted August 9, 2020 Last of the Mohicans for the CR-01... the Aluminum axle housings weigh in at without no gears, axles and bearings nor grease 8.2oz. (230g) each. 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted August 23, 2020 for the MST Winchester... Precision RC Works Warthog H.O.G. Hand Of God Servo Winch (Internal Spool) Share this post Link to post Share on other sites
ACCEL 2014 Posted August 23, 2020 May the Force be with us to the Top... 2 Share this post Link to post Share on other sites
ACCEL 2014 Posted August 28, 2020 looking through the T3-01 Dual Rider manual shows to tape servo RX wire behind and up, sifting through low profile servos looks as though POWER HD has a new servo out to combat this... Hop Me Ups started coming in... never have i put any RC parts into a metal tool box until now (except for my Ammo boxes for batteries) let's see what's inside... The kit and other parts should be arriving soon Share this post Link to post Share on other sites
ACCEL 2014 Posted August 30, 2020 Look what just popped out of the oven, fresh from the bakery, some more delivered parts for a delivery vehicle, oh that's sweet and doughy....................... Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted August 30, 2020 You're starting to kill me with all the carbon fiber and aluminum goodies shown in this thread... Must. resist. urge. to. buy. more. 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 1, 2020 Round three.... it's beginning to smell like pizza (that crack is for Busdriver) 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 1, 2020 Input voltage limit 6-8.4V. got this idea from s-irwin @ Ebay he mentioned after i saw his T3-01 with the CC which this combo is out of stock, and told me he's going to try the Dynamite 2 in 1 (esc is in the motor), so i purchased one to give it a go look forward to seeing it go forward. 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 3, 2020 Special Delivery! a Door Dash Special now for a theme, Domino's Pizza, Cheech and Chong Special Needs Supplies, perhaps a Masseuse Service, Auto parts delivery, gosh it's endless... i had just figured it out, made since with the anime style driver character and all Share this post Link to post Share on other sites
ACCEL 2014 Posted September 13, 2020 Good things happen to those who wait......................................................................... How many horses does it take to make a Ferrari go fast? a lot more than four. 2 Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted September 13, 2020 Can he join the fun? Couldn't resist, my friend! Great looking car! 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 13, 2020 well this build has gone quite quickly, thus i take my brake now, The Frog............................................................ 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 14, 2020 The Frog gets horses......... 2 Share this post Link to post Share on other sites
Re-Bugged 10147 Posted September 14, 2020 Cool, but now I’ve reddit reddit what’s next bud? Share this post Link to post Share on other sites
ACCEL 2014 Posted September 15, 2020 1 hour ago, Re-Bugged said: Cool, but now I’ve reddit reddit what’s next bud? i started this because of that, and this was waiting for parts to arrive for the other, and that one got hung up because it had a leak, and then the PGH had Led light failure and ordered those, and then Ed's T3-01 needed other trani parts so i could build the stock kit one, then i figured with the left over kit parts on that i could order a few more and build another T3-01, now that the Tamiya Frog is basically done it's waiting on the PS-11 paint, and then ordered Hot Florescent Pink and white backer with high gloss black Spazstix paint for the RJSpeed Shirley Muldowney's Dragster build (need a good name for that build), i was thinking "Shirley it's Pink" (get it surely, Shirley ) anyways that's when i have been reading up on airbrushes, but i've been a rattle can man for so long i'd probably loose that marble. so than the XV-03 is waiting for the Aluminum C-Hubs and its paint has been here for some time, and i believe the 4Tec 2.0 is waiting for a particular part and forget what it was, awe go figure well if that's not next i believe i have to solder a negative lead to the ESC on the CRC LSM19 Ferriari Machine that's the 1:12 scale. but i really should be working on the back yard. decisions, decisions? Oh! i think i've decided on a decision that needs to be dealt with with dubious demeanor that may or may not be detrimental to any one of the above mentioned details that need to be done. there, i did it. 2 Share this post Link to post Share on other sites
ACCEL 2014 Posted September 16, 2020 For the pond, Thanx very much to The MAD RACER I enjoyed reading this very much, since i've been Frog bit My Frog build went fairly quickly, thus now i have more time reading on to modify another, something like this.................... Now i'm leaping for joy! Share this post Link to post Share on other sites
ACCEL 2014 Posted September 20, 2020 On 6/26/2020 at 6:02 PM, ACCEL said: Top Fuel Dragster rear rims & tires, now i get to learn how to shape foam rubber wheels, oh how intriguing....................................................................... Please let's look on......................................... Ok i'll just take a quick glance, i'm sorry i lied, i can't keep my eyes off of them, quick glance was it? i thought not. Almost 3 months, yes that's Three months that the fronts have been out of stock. Well they finally rolled in The stuff that galaxy's are made of............................................................................. now i just need to get to ACE and get the "O" Rings. Share this post Link to post Share on other sites
ACCEL 2014 Posted September 26, 2020 It's H e r e! 2 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 3, 2020 Motor'n! Sky RC 13.5T W/dual sensor ports 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 9, 2020 What is this that stares back at me? RC Motors. just can not get enough of these mini motorized jewels. i can't wait for my Team Orion Vortex Ultimate Stock to come and adorn my collection. 2 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 10, 2020 Oh!....................................Oh...................Ha ha Oh......................oh oh oh........................YES! This contraption landed in my email, figured already have plenty a nifty hardware for it anyway, so why not, first item i've seen new that has come out for this build in eons. Now for the pictures that take you to a place as though you were in OZ. ACCEL, this isn't Kansas anymore................................................................................... 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 15, 2020 Who wouldn't ? The Dangers of shopping for RC parts. Oh! Yes I did. (not the wheels, the wing spin nuts) 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 16, 2020 This should go nicely with the Gen4............................. Placed Oct 15 2020 at 4:56 PM (Pacific Standard Time) AMain Hobbies (T-180 next week) The T-120 yes this servo is extremely Super Sexy and is much cheaper than a blind date. 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 18, 2020 just going back into SERVO MODE: Lots of new ones on there way, some old friends and new acquaintances. Alturn AHLS-1510HTG+HV 10Kg-15kg + or - 1 Share this post Link to post Share on other sites
ACCEL 2014 Posted October 18, 2020 Why do these pistons cost the money they do? R&D, and for the very first time i'm starting to give them a try, randomly rebuilding some shocks and installing them in new sets. Let's peek over here, Flash Point FP2128 12mm Brass 1/10 Shock Piston VRP V2 1/10 "X V2" and will delve into some others as well... 1 Share this post Link to post Share on other sites