Badcrumble 4204 Posted February 13, 2020 I never meant to have an M05-RA. I happened upon a Tamico sale before Christmas and snapped up a 2CV Rally, primarily for the body and wheels. Then @Percymon put some M05 hop-ups up for sale. All of a sudden, a new project was born... Step One First step, first hop-up. Alloy servo mount. Step Two Includes alloy motor plate. 7 Share this post Link to post Share on other sites
Superluminal 3750 Posted February 13, 2020 Box art body? Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 13, 2020 27 minutes ago, Superluminal said: Box art body? Likely not 1 Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 13, 2020 Step Three Woah! I now have a very stiff diff when turned by hand. I think I have put way too much in though I didn’t use that much. 1 Share this post Link to post Share on other sites
Busdriver 6209 Posted February 13, 2020 Arent the gears the wrong way round? ie bevel in not out!!! 1 Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 13, 2020 3 minutes ago, Busdriver said: Arent the gears the wrong way round? ie bevel in not out!!! Well spotted! They were, it was soon rectified but I forgot to take another photo. If only I could follow simple instructions.... 3 Share this post Link to post Share on other sites
ACCEL 2014 Posted February 14, 2020 it used to bother me the details that my camera would pick up after i posted a pic, then i'd have to go back to correct or touch up. so it's a blessing in disguise. 2 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted February 14, 2020 It was not expensive to go for the M05ver2 chassis parts tree. In order to fit Lipo batteries. Thats what I did and ended up with a spare M05 hah mine is waiting for steering hop ups. Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 14, 2020 Step Four Small step, no hop-ups. @Fabia130vRS, I only have NiMH batteries at the moment and I think the alu motor plate doesn’t work with the ver2 chassis. 1 Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted February 14, 2020 3 hours ago, Badcrumble said: @Fabia130vRS, I only have NiMH batteries at the moment and I think the alu motor plate doesn’t work with the ver2 chassis. I believe you are right, but that means I bought the alu motor mount for the ver2. Also suspension arms are different and king pins instead of screws. interested how the build will go on. Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 17, 2020 Step Five Step Six And this is where things start to go wrong... The gear shaft of the smaller gear will not seat in the chassis half, meaning I can’t get the chassis halves together. I have tried both the kit and the hop-up shafts, same issue. Anyone with previous M05 experience offer any guidance?! Share this post Link to post Share on other sites
TurnipJF 9192 Posted February 17, 2020 I can't say I had any issues with this win building my M-05. However it is highly unlikely that there would be the same production issue with both a kit and a hop-up shaft, which suggests that the issue lies with the chassis. I am guessing that you have checked for things such as moulding errors or moulding flash/debris caught in one of the shaft holes? 1 1 Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 17, 2020 This is the chassis, I was expecting a few mm of the shaft to ‘seat’ in the recess. Thinking I might need to take a file to it to open it out? Share this post Link to post Share on other sites
TurnipJF 9192 Posted February 17, 2020 2 hours ago, Badcrumble said: This is the chassis, I was expecting a few mm of the shaft to ‘seat’ in the recess. Thinking I might need to take a file to it to open it out? If it isn't seating, yes. The end of the shaft should be right up against the bottom of the recess. Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 17, 2020 Just now, TurnipJF said: If it isn't seating, yes. The end of the shaft should be right up against the bottom of the recess. Thanks, that’s what I thought. I’ll get my calipers on it tomorrow to see how much needs removing and grab my reamer / files. Worst case, I’ll order another chassis (cue M05 number two...) or the lovely Renault 5 for a full set of spares and a shelfer body I’ll never display!!! 2 Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 18, 2020 Build on hold while Tamico review the photos i have sent them of the chassis. Share this post Link to post Share on other sites
Percymon 2184 Posted February 19, 2020 Oh dear, not a great start. Was hoping to see a long thread of hop ups Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 19, 2020 I’m waiting on Tamico while they liaise with their supplier. On the plus side, it allows more parts to arrive...there will be plenty of hop ups @Percymon 😏 Share this post Link to post Share on other sites
Percymon 2184 Posted February 29, 2020 Any update? I would have hoped Tamico would have sent out replacement cases the next day ! Share this post Link to post Share on other sites
Badcrumble 4204 Posted February 29, 2020 Nothing yet. If I haven’t received the chassis by the end of next week I will get in touch with Tamico again. Share this post Link to post Share on other sites
Badcrumble 4204 Posted March 4, 2020 Replacement chassis received! It had been with a neighbour since Sunday but I was unaware. Off on a work trip now so hopefully re-start the build on Friday. 3 Share this post Link to post Share on other sites
Percymon 2184 Posted March 5, 2020 Good news, hopefully the replacement is correct and you can get back to enjoying the build Share this post Link to post Share on other sites
Badcrumble 4204 Posted March 6, 2020 The build is back on! 1 Share this post Link to post Share on other sites
Badcrumble 4204 Posted March 6, 2020 Step six complete 3 Share this post Link to post Share on other sites
Busdriver 6209 Posted March 6, 2020 (edited) Have you decided what you are going to do with the body. Box art or something else? Sorry just realised you answered sort of earlier in the thread Edited March 6, 2020 by Busdriver Didnt read all posts carefully Share this post Link to post Share on other sites