juleo68 176 Posted April 18, 2020 Hi I had the idea of modifying my chassis to do something similar...But it's very complicated to find this kind of wheels! 1 Share this post Link to post Share on other sites
juleo68 176 Posted April 18, 2020 And why not install Pan Car wheels to get 235mm sounds good!! First, go to the drawing board with AutoCAD to find a solution to get Pan Car wheels integration... I begin by the rear axis, I would like to make an adapter to easily install a Pan Car rim on a F103 diff from 3 Racing. -In green, is the rim -In yellow with purple hatching, is the new adapter 3 Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 I'm now in charge of the front axis...I should be 210mm wide! -In blue, self locking nut -In purple, the both flange bearings -In yellow, the new bushing (8mm) that I should make -In bues, wheel stub from 3 Racing -In red, new rim axis (to be made) 1 Share this post Link to post Share on other sites
Superluminal 3750 Posted April 19, 2020 Does the wheel on the pan car use a different size axle to a standard tamiya? Hence the flanged bearings on your front wheel design? Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 And here, the wheel adapter... Now, ready to machine! I start by a surfacing Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 Parts done... The next step will be the assembly! 6 Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 Assembly pics... I think will be better with a low profil self locking nut! New front axis + bushing Now the chassis have at the rear 235mm and 210mm at the front! 1 Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 For the body, I'll have to fix it, for that, I'll need to replace the existing carbon plate by a new one because it's not wide enough! First, I had to make a MDF prototype to know where to install the body mounts. I also made a new front bumper Lexan body in place just for the fun...from Protoform...P905B 2 Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 New bumper machined! Same for the rear carbon plate The diffuser is from ABC Hobby 1 Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 Body in place and adjusted... Now, ready to paint! Backing done. Share this post Link to post Share on other sites
juleo68 176 Posted April 19, 2020 The stickers are from MCI... Project done... Thanks for following me! 13 Share this post Link to post Share on other sites
svenb 3778 Posted April 19, 2020 That looks fantastic we'll done Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted April 19, 2020 Nice work! Share this post Link to post Share on other sites
juleo68 176 Posted April 23, 2020 On 4/19/2020 at 9:51 AM, Superluminal said: Does the wheel on the pan car use a different size axle to a standard tamiya? Hence the flanged bearings on your front wheel design? Hi Yes, an Pan Car rim needs two flanged bearings, but the boring is same...only the length of axis changes, diameter is same! Share this post Link to post Share on other sites
mailboxck 29 Posted May 30, 2020 Can I ask where you got that rear diffuser? Share this post Link to post Share on other sites
Fabia130vRS 2098 Posted May 30, 2020 The rear diffuser is really a piece of art. so the whole car is. Share this post Link to post Share on other sites
juleo68 176 Posted May 30, 2020 9 hours ago, mailboxck said: Can I ask where you got that rear diffuser? From ABC Hobby! Share this post Link to post Share on other sites
MPJG! 42 Posted May 31, 2020 That looks like a total beast. Great work Share this post Link to post Share on other sites
TwistedxSlayer 1290 Posted May 31, 2020 That is proper cool. Job well done! Share this post Link to post Share on other sites