Jump to content
Calibershock

Receiver channel 2 only working? (Solved)

Recommended Posts

Hi 

 

i have a new motor esc, new servo and transmitter and receiver.

i hooked up motor and esc to channel 2 ... others channels did nothing. So channel 2 is being used for throttle.

I just tried the servo in Channel 1 and 3 and nothing happened. Tried channel 2 (put the esc in channel 1 for power) and the servo works in channel 2 but with the throttle trigger. 

 

Not sure what I’m doing wrong 

Share this post


Link to post
Share on other sites

Sounds like a dud receiver , but have you plugged the esc / servo into channel 1 the right way up . If you have the plug upside down it won't work . I guess you have plugged it in the right way , so could be a dud receiver . Try the servo into each port and see if they work , but don't plug in the esc yet

Share this post


Link to post
Share on other sites

So I got it working... I used the fail safe reset button on the receiver and worked but now I have a new issue ... the servo i brought is a continuous servo ... 

I’ve ordered a new one lol 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...