Nicadraus 6201 Posted June 1, 2020 Anyone knows the part number for the TRF420 ball cups and connectors? I'm really digging it. I'd like to order them and replace the ones in my kits. Looks like this... Share this post Link to post Share on other sites
speedy_w_beans 4272 Posted June 1, 2020 Parts are listed at the back of the manual: https://www.tamiyausa.com/media/files/42345ml-1117-c1b7.pdf They finally caught up with 3Racing... Share this post Link to post Share on other sites
Nicadraus 6201 Posted June 1, 2020 46 minutes ago, speedy_w_beans said: Parts are listed at the back of the manual: https://www.tamiyausa.com/media/files/42345ml-1117-c1b7.pdf They finally caught up with 3Racing... Thanks! The 3Racing and Yeah Racing counterparts says they are 4.8mm and not 5mm like Tamiya is using. Share this post Link to post Share on other sites
ThunderDragonCy 7886 Posted June 1, 2020 Part you needis 54868. The mefium length are same as the kit adjusters on ff03. The short version is 7mm shorter so no good. I have some and they are hard plastic and very tight. However they are also big. 10mm diameter rather than 8mm on the kit items, so be careful of clearances where its tight, like in the steering on the FF03. Share this post Link to post Share on other sites
Nicadraus 6201 Posted June 1, 2020 5 hours ago, ThunderDragonCy said: Part you needis 54868. The mefium length are same as the kit adjusters on ff03. The short version is 7mm shorter so no good. I have some and they are hard plastic and very tight. However they are also big. 10mm diameter rather than 8mm on the kit items, so be careful of clearances where its tight, like in the steering on the FF03. Ok thanks for the info Cy. 1 Share this post Link to post Share on other sites
