Howards 450 Posted July 15, 2020 Lots of people on here building these up at the moment. Would be good to see them all in one place with the various hop-ups / mods. All variations of 201/211 welcome! I'll start Year: 2020 Body: Zahhak & OG TRF 201 Current Hop-ups: 201 metal diff halves 201 titanium turnbuckles Big Bore Aeration dampers and TRF spring set Pink wheels Alloy front suspension weight Alloy rear suspension mounts Heatsink gearbox plate 201 Slipper clutch Double Cardan drive shafts Alloy hubs rear Ballraced steering ESC: Absima Thrust Motor: Goolrc 9t 4700kv Battery: Overlander 2s 5000mah 8 Share this post Link to post Share on other sites
rwordenjr 1889 Posted July 15, 2020 1 hour ago, Howards said: Lots of people on here building these up at the moment. Would be good to see them all in one place with the various hop-ups / mods. All variations of 201/211 welcome! I'll start Year: 2020 Body: Zahhak & OG TRF 201 Current Hop-ups: 201 metal diff halves 201 titanium turnbuckles Big Bore Aeration dampers and TRF spring set Pink wheels Alloy front suspension weight Alloy rear suspension mounts Heatsink gearbox plate 201 Slipper clutch Double Cardan drive shafts Alloy hubs rear Ballraced steering ESC: Absima Thrust Motor: Goolrc 9t 4700kv Battery: Overlander 2s 5000mah That’s lovely ! I’ve got a trf201 w upgrade set and a zahhak. the zahhak is waiting for a motor to complete it. 5 Share this post Link to post Share on other sites
Manix92 121 Posted July 15, 2020 I wonder if anyone has done the standard colour scheme on the Zahhak. Share this post Link to post Share on other sites
ThunderDragonCy 7779 Posted July 15, 2020 This is my (now sold) DN01. It was running a few nice hop ups, but until the last couple of months I owned it I run the CVA dampers. It's a Team Azarashi Quracca shell, supposedly for an RB5, but it fit really well. It had alloy suspension blocks, double carbon driveshafts, slipper clutch, kyosho optima gear diff conversion, 13.5/3300kV brushless with an Associated B4 72t spur and 27t pinion. I also had the 5 deg caster c-hubs on it too. Lovely thing. 5 Share this post Link to post Share on other sites
rwordenjr 1889 Posted July 15, 2020 1 hour ago, Manix92 said: I wonder if anyone has done the standard colour scheme on the Zahhak. Not worth the trouble with those decals 😅 Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 15, 2020 2 hours ago, Manix92 said: I wonder if anyone has done the standard colour scheme on the Zahhak. A guy on Tamiya Legends Facebook group has just completed a box art body-looks good! Share this post Link to post Share on other sites
Howards 450 Posted July 15, 2020 I’d be tempted to do a box art Zahhak but the stickers look super tricky to get right. I like the way it was a nod to the Super Astute though. Share this post Link to post Share on other sites
Howards 450 Posted July 15, 2020 Mine with a curiously baroque looking 201 shell. Can't use it with this shell though at the mo as it doesn't really fit over my ESC 3 Share this post Link to post Share on other sites
Jontea 334 Posted July 15, 2020 Mine, so far....... 1 Share this post Link to post Share on other sites
Manix92 121 Posted July 15, 2020 @Futura gets prize for original box art. TBH it looks better than on the box. 2 Share this post Link to post Share on other sites
Mahjik 197 Posted July 16, 2020 Couple of older images of mine (and my XB4)... 8 Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 16, 2020 Great idea for a thread this @Howards nice to see them all in one place... Heres my DN-01 built during lockdown. Like everything else, I got totally carried away with this build! Big Bores Weighted front suspension mount 54439 Reinforced front arms 54265 30 degree hub carriers 51410 Aluminium rear suspension mounts 54242 54243 0 degree aluminium rear uprights 54254 Titanium coated shafts 54241 53851 Aluminium motor plate 54276 Slipper clutch 54260 Titanium screws Turnbuckles Double cardans 42284 Savox servo Tamiya 10.5 motor TBLE02S ESC (until further notice) AttackRC painted 201 bodies and wings Probably some bits I've missed off this list. I also have a full set of 201 plastics and complete 201 diff set up as spares. 10 Share this post Link to post Share on other sites
Howards 450 Posted July 16, 2020 30 minutes ago, gregdogghurst said: Great idea for a thread this @Howards nice to see them all in one place... Heres my DN-01 built during lockdown. Like everything else, I got totally carried away with this build! Big Bores Weighted front suspension mount 54439 Reinforced front arms 54265 30 degree hub carriers 51410 Aluminium rear suspension mounts 54242 54243 0 degree aluminium rear uprights 54254 Titanium coated shafts 54241 53851 Aluminium motor plate 54276 Slipper clutch 54260 Titanium screws Turnbuckles Double cardans 42284 Savox servo Tamiya 10.5 motor TBLE02S ESC (until further notice) AttackRC painted 201 bodies and wings Probably some bits I've missed off this list. I also have a full set of 201 plastics and complete 201 diff set up as spares. That is a proper beast. 11/10. Love those turnbuckles. how do you find find the 10.5 with the TBLE? Mine trips the temp cut off in my Durga in hot weather but the air flow is rubbish even with the fan. 2 Share this post Link to post Share on other sites
DeadMeat666 1675 Posted July 16, 2020 35 minutes ago, gregdogghurst said: AttackRC painted 201 bodies and wings How was your experience with AttackRC? I'm thinking of sending off my DF03 body for a job, but I'm worried about shipping times, dealings, etc. 1 Share this post Link to post Share on other sites
Rb4276 803 Posted July 16, 2020 Here is my dn01 that i just rebuilt after breaking it in half. I bought from tamiyausa over 4 years ago. castle 4600 kv combo df03 shocks slipper clutch tamiya servo horn tamiya front weight hitec high speed servo exotek battery plate tamiya hex for rear tires tamiya trf motor plate not the light weight one trf rear uprights trf 201 cardon universals Aluminum rear suspension mounts trf 201 diff joints flourine coated suspension balls tungsten diff balls and trf reinforced gear parts jconcepts rips, blockades rear for dirt & duratrax bandito for street reinforced arms the zahhak body is not the original when i bought the kit. I found one in canada after looking for a year. The trf 201 body i never run since then if anyone is looking for parts i have many extras new an used i could maybe help someone out. Im glad to see the dn01 get love, people hated on it for years and i alway said how good it was. 3 Share this post Link to post Share on other sites
Finnsllc 917 Posted July 16, 2020 where does everyone get the trf decals? ive wanted to do a trf shell but can never figure out how to get the pink blue white stickers Share this post Link to post Share on other sites
dannymulder 766 Posted July 16, 2020 This is how my zahhak looks like now today, the gearbox and suspension arms and parts are used in this grasshopper fusion car, the rest off it is in the bin. 3 Share this post Link to post Share on other sites
Howards 450 Posted July 16, 2020 22 minutes ago, dannymulder said: This is how my zahhak looks like now today, the gearbox and suspension arms and parts are used in this grasshopper fusion car, the rest off it is in the bin. That's quite the... creation! Well done. I think! Share this post Link to post Share on other sites
A-Baum 352 Posted July 16, 2020 3 hours ago, DeadMeat666 said: How was your experience with AttackRC? I'm thinking of sending off my DF03 body for a job, but I'm worried about shipping times, dealings, etc. Just curious if I were to send them a body, what does a paint job run? Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 16, 2020 7 hours ago, Howards said: That is a proper beast. 11/10. Love those turnbuckles. how do you find find the 10.5 with the TBLE? Mine trips the temp cut off in my Durga in hot weather but the air flow is rubbish even with the fan. Thanks man To be honest I haven’t had the opportunity to run it off road at all since it’s been finished. Only had a few test runs on tarmac with 23/79 gearing and no issues. As you say there’s very little airflow or space under the body. Also, I’m sceptical about my ESC as I’ve been inside and changed out all the wiring for black direct to motor and added a lipo cut off modification. I’ve got a DB-01 build on the go at the moment which I have another 10.5 motor but with a TBLE03S ESC. The unit itself is much smaller and has an integrated fan so should be better for cooling. I don’t hear many good reports about these ESCs so concerned I should have spent elsewhere Greg Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 16, 2020 7 hours ago, DeadMeat666 said: How was your experience with AttackRC? I'm thinking of sending off my DF03 body for a job, but I'm worried about shipping times, dealings, etc. I would recommend them 100% Communication and finished product are perfect. Shipping times are what they are... I got 2 sets of bodies and wings done for this project (1 as runners other for display) and I have 3 more projects I’ll be sending to them when parts arrive/I get round to it... Greg 1 Share this post Link to post Share on other sites
gregdogghurst 321 Posted July 16, 2020 3 hours ago, A-Baum said: Just curious if I were to send them a body, what does a paint job run? In terms of time, mine took about 2 weeks. Not including postage. In terms of cost, I paid €55 per body. 1 Share this post Link to post Share on other sites
Manix92 121 Posted July 16, 2020 Mine has been on the builds for a bit now. The spec is changing weekly 5 Share this post Link to post Share on other sites