whahooo 465 Posted November 30, 2020 Since i installed a DumboRC Transmitter with an Gyro inside, i decided to install a Gyro in my 2nd scorcher. I purchased that: https://www.amazon.de/gp/product/B07XJM1DRK/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 The gyro does not much wen i swing the Scorchers Tail, but if i roll the Car the Gyro begins to steer much more. Is there a proper way for the Gyro to be installed? There are 2 Potientometers, but i do not have any manual.... Share this post Link to post Share on other sites
Badcrumble 4181 Posted December 1, 2020 Here's a video for it video link I know that a gyro should be mounted as centrally as possible so it can measure the left / right movement. Share this post Link to post Share on other sites
whahooo 465 Posted December 2, 2020 Thanks a lot for that Video. I didn`t found it with my Youtubesearchabilitys.... So i completly mounted it wrong I munted it flat , but you have to mount it standing up un its Side. Share this post Link to post Share on other sites