Matty36 267 Posted August 30, 2021 The last kit I built in the middle, just because I wanted to build a pan car, the subaru next to it was the last chassis I got working with lipo as it was never designed for modern technology. The toyota supra was one of my last race cars from early 2000s, the black escort cosworth just out of sight next to the subaru was the first kit I got in 1990s which is a ta01. I never sell much, just keep it on a shelf after use. 3 Share this post Link to post Share on other sites
Willy iine 18806 Posted August 30, 2021 24 minutes ago, Matty36 said: The last kit I built in the middle, just because I wanted to build a pan car, the subaru next to it was the last chassis I got working with lipo as it was never designed for modern technology. The toyota supra was one of my last race cars from early 2000s, the black escort cosworth just out of sight next to the subaru was the first kit I got in 1990s which is a ta01. I never sell much, just keep it on a shelf after use. Looks good. Which pancar is that? The last pancar I had was a TC3-Touring (I think it was called) which ran standard touring car bodies. I would rip up the place blowing past modified 12turn (brushed since late 90's) sedans with my 27turn it was hilarious. I never raced with it, but during practice I'd pull it out for fun. Share this post Link to post Share on other sites
Pylon80 2632 Posted August 31, 2021 On 8/29/2021 at 10:53 AM, TurboTimmy said: For bashing I use the 962 body. Eventually I will paint and finish the NASCAR body that came with the kit. That one will be used for track events as I expect it to get knocked around a bit. The width of the rear is 197mm and the front measures 190mm. The overall length without a body is 343mm and the wheelbase on this particular chassis is at its longest setting at 270mm. This pan can have three settings for wheelbase-and I think the shortest one measures 260mm. The front A -arms are moved back or forward-and, of course, you must move the steering servo accordingly. Mine has a permanent setting that uses servo mounts and two screws from one of my Tamiya kits because I don't like using only two sided tape to secure it. Thanx for the interest. I hope this info helped. Pan cars are a blast-but they work best on the smoothest pavement. Thank you sir for taking the time to measure it. I do like the simplicity of these. There's a Mazda 787b body that pops up once in a while on feebay and it's of unknown brand and softly uncertain dimensions. I have been thinking that a simple chassis like these pan cars would make for an interesting match and a cool project! Share this post Link to post Share on other sites
Matty36 267 Posted August 31, 2021 6 hours ago, Willy iine said: Looks good. Which pancar is that? The last pancar I had was a TC3-Touring (I think it was called) which ran standard touring car bodies. I would rip up the place blowing past modified 12turn (brushed since late 90's) sedans with my 27turn it was hilarious. I never raced with it, but during practice I'd pull it out for fun. It's a carisma racing chassis, it can also be an f1 with the wings and body. Share this post Link to post Share on other sites
Nikko85 3454 Posted August 31, 2021 My latest, and first ever Tamiya... 4 Share this post Link to post Share on other sites
Willy iine 18806 Posted August 31, 2021 4 hours ago, Matty36 said: It's a carisma racing chassis, it can also be an f1 with the wings and body. Very cool. Pancars are so much fun to drive. Share this post Link to post Share on other sites
TurboTimmy 88 Posted August 31, 2021 My pan car is an RJ Speed (formerly Bolink) 3.2 pan car kit with an RJS 962 body. You need to supply a motor, esc, radio, and steering servo. I just use standard 2 channel stuff-nothing fancy. A Hobbywing 1060 brushed esc is my go-to because I can use a brushed motor down to about 13 turns-but right now a Torque Tuned 540 is plenty. I am an old school brushed/NiMh warrior. I've seen and heard too many horror stories about LiPo batteries and the potential for bad things to happen-and the extra expense and maintenance that goes with them. I realize they have more power than what I use, but the extra speed, to me anyway, isn't worth the bother. I just plug-n-play with my NiMh stuff. Not a dig on folks who use LiPo-I realize they're in the majority now-but it's just a choice I have made. 1 Share this post Link to post Share on other sites
Glowingtomato 77 Posted September 5, 2021 On 8/26/2021 at 6:35 AM, Nwc100 said: @Glowingtomato Any chance we could have some close ups on the engine area, it looks great and I’m quite keen to build one but wanted to detail a bit in that area. Thanks Nick Here's a picture. I was going post one from the body manual as well but I think I threw it away. There is some good potential for detail in there. I just sprayed it black and the silver and red parts are decals. 3 Share this post Link to post Share on other sites
Rider400 353 Posted September 5, 2021 I bought a Kyosho Mad Van a few months back. Its fast af, does maybe 35mph and handles great. But I seriously had way more fun running this thing yesterday. (And wrenching on it too) Love the old school. Its got a comical vibe to it. The bouncing and lack of handling makes it really fun. Really glad I found this hobby again. 6 Share this post Link to post Share on other sites
Nwc100 462 Posted September 5, 2021 2 hours ago, Glowingtomato said: Here's a picture. I was going post one from the body manual as well but I think I threw it away. There is some good potential for detail in there. I just sprayed it black and the silver and red parts are decals. Thanks, I really like the clear part, it looks great! Now I’m tempted on another one with a super tidy electronics install. Share this post Link to post Share on other sites
Superluminal 3750 Posted September 5, 2021 On 8/31/2021 at 4:40 AM, Pylon80 said: There's a Mazda 787b body that pops up once in a while on feebay and it's of unknown brand and softly uncertain dimensions. That might be the L&L models one - I have one on an F103GT chassis. The quality of the shell is pretty good but the decals arent great. They arent very sticky on curved surfaces and isnt a lot of opacity to the colours. It fits 190mm wide chassis and the wheelbase can be cut as you like as they wheel arches dont have a particularly strong mould line. I lined the shell up on the chassis first and cut them out with a compass circle cutter thing. The body shell does have a bit of a strange flare in width at the back which means its too wide for the wheels so I glued on some fishing line to hold in pull it back in and hook on to the chassis. The Tamiya Group C body also does this to a certain extent. 5 1 Share this post Link to post Share on other sites
Pylon80 2632 Posted September 6, 2021 3 hours ago, Superluminal said: That might be the L&L models one - I have one on an F103GT chassis. The quality of the shell is pretty good but the decals arent great. They arent very sticky on curved surfaces and isnt a lot of opacity to the colours. It fits 190mm wide chassis and the wheelbase can be cut as you like as they wheel arches dont have a particularly strong mould line. I lined the shell up on the chassis first and cut them out with a compass circle cutter thing. The body shell does have a bit of a strange flare in width at the back which means its too wide for the wheels so I glued on some fishing line to hold in pull it back in and hook on to the chassis. The Tamiya Group C body also does this to a certain extent. Oh my is it gorgeous 🤩 1 Share this post Link to post Share on other sites
Willy iine 18806 Posted September 25, 2021 I want to thank @JennyMo for her comical SandScorcher inspiration and also @Busdriver for all the one off cars you both have been making for even more inspiration! I will update this post when I have the exhaust tip for the rear.. but for now.. Started here with a Monster / Blitzer Beetle body with a Blitzer nose cone.. since I knew nothing about these Beetles. To here..on a GF01. I will be making a couple more of these for practice in different color schemes. UPDATE: Here is the update with exhaust canister and tip. 8 Share this post Link to post Share on other sites
Re-Bugged 10155 Posted September 26, 2021 A very worthy addition to the fleet Mr @Willy iine 👍🏻 1 Share this post Link to post Share on other sites
Busdriver 6209 Posted September 26, 2021 Excellent work as usual 1 Share this post Link to post Share on other sites
Rider400 353 Posted September 26, 2021 A couple Stadium ORVs... 8 Share this post Link to post Share on other sites
Oldskool78 36 Posted April 21, 2022 My first foray back into Tamiya kits. An Xmas present this year from my wife. I owned a couple growing up - a Falcon (I think!) and a Vanquish in the early 90s. I'm also building a couple of TT02Bs with my boys and I'm waiting for a Durga to arrive for me! Oh joy, mechanical speed controllers are a thing of the past! 6 Share this post Link to post Share on other sites
OnTheTrail 1152 Posted April 21, 2022 On 9/25/2021 at 9:57 PM, Rider400 said: A couple Stadium ORVs... Anyone know where I can get these scale mirrors? Are they the Traxxas Bronco ones perhaps? Thx..... 1 Share this post Link to post Share on other sites
paullyjay 182 Posted April 21, 2022 My Latest Build... Super Hot Shot not in Box-art colours... 14 Share this post Link to post Share on other sites
Willy iine 18806 Posted May 9, 2022 Great looking car, @Ministrone!! Share this post Link to post Share on other sites
Ministrone 1455 Posted May 9, 2022 17 minutes ago, Willy iine said: Great looking car, @Ministrone!! Thank you sir. Share this post Link to post Share on other sites
BigLion 4 Posted May 10, 2022 On 8/30/2021 at 2:59 AM, Bazza78 said: Love this colour scheme - you executed it beautifully!! I remember mine ripping through the frost when I finished building it just after Christmas (1980-something) - I had some gbx problems though - you? My parents never told me what happened to it ! Share this post Link to post Share on other sites