Audi Quattro Rally 58036 Build

[KEV THE REV 2440]

1 hour ago, Exit13 said:

Boom!!

Much better

[Jeepy2013 757]

Excellent! 

[Jamesssb 237]

Sorry to hijack this thread, any ideas on where I can get a set of front and rear tyres from?

[Jamesssb 237]

I Found the tyres, I don’t suppose you have a rear axle tube or a chassis in your spares pile do you?

[Exit13 780]

On 9/6/2022 at 12:47 PM, Jamesssb said:

I Found the tyres, I don’t suppose you have a rear axle tube or a chassis in your spares pile do you?

Def not a chassis. And the only tubes I have would be the ones up front but I can check again

[Jamesssb 237]

9 hours ago, Exit13 said:

Def not a chassis. And the only tubes I have would be the ones up front but I can check again

Ok thanks. Need the rear springs also as mine are rusty!

[Smirrors 186]

Very cool build. Was looking to see what I could source but there isn't much left these days.

[simensays 380]

On 9/9/2022 at 11:27 AM, Jamesssb said:

Ok thanks. Need the rear springs also as mine are rusty!

Get some steel wool and polish them up, will look like new and function just the same! Restore rather than replace whenever possible

[Exit13 780]

Please continue to enjoy my journey with me on my 58036 build. Next up is Michele Mouton. 

I’ve had the entire tree new in package for about a year so I think it’s time that I retire willies and let her drive her Audi Quattro rally. I’m also going to do up the hood vents since I needed them too. 

[Exit13 780]

I didn’t want to let Willy’s with his Audi apparel go to waste so I found other Audi Quattro for him to drive 

now on to Michelle !!

[Exit13 780]

I’m having too much fun test fitting the hood vents. 
 

[Exit13 780]

And Michele is looking hot 

[Exit13 780]

The vents are done 

[Exit13 780]

Here is the final Michele , Hood Vents and License Plate.  

[Exit13 780]

And in case you want to see Michelle before she goes in the car 

[Exit13 780]

hey everyone. My 58036 saga continues!!  I’ve got the Tamiya bug again after building a re re Lunchbox w my Nephew  and look what I found on eBay!!  I hopes it an Audi or Opel Ascona . Sure looks like it. I think I got it for a song as not everyone knew what it was (it had some 57 Chevy body on it and big tires)  shipping was quite expensive but what can you. Shrink-Flation !  The car is a little cracked up in the front but I’m hoping my 3-D printed parts stash has enough to fix it 

https://imgur.com/a/2NIUZPq

I still have not seen the car yet   when it gets to my US east coast from the Colorado Rockies I’ll post up  

 

[Exit13 780]

https://imgur.com/a/2NIUZPq
hmm.  Not sure why only my first picture of my eBay auction shows as a pic and my 3D print stash parts is just a link. EDIT to  try this attachment 

Edited March 18 by Exit13
Edit for picture

[njmlondon 820]

Great find . Nothing like spotting something rare a cool lurking online, not properly described or named.

Good luck!

[Exit13 780]

It’s arrived!!  And I’ve got my parts all ready to go

[Exit13 780]

I mocked up my new 58036/7 with my spare body and my HCT tires. Looks like I’ve got some front end work to do on it but this should be fun!

[Exit13 780]

Out with the old. Wow are these parts impossible to find 

[Exit13 780]

And in with the new. Lucky I has a stash that is depleted now. Where are my 3D print options for these bulk heads and suspension arms!!!???

[Exit13 780]

It’s all good. I just need to do the electronics and I’ll be up and running!

[njmlondon 820]

I had no idea those chassis parts were so rare. They have an awful lot in common with the OG Wild Willy don’t they? There is a thread in the Tamiya Designs section where someone 3d printed a lot of parts for their very frequently run Wild Willy… may be worth finding that.

[Exit13 780]

Yes these share a front end and many parts with original wild Willy’s. I seem to be able to find some files on the bulkhead and suspension arms available I just can’t find a printer to produce them. I’ve uploaded to files to craft cloud but I don’t know how to respond to their sizing and materials question so I’m basically dead in the water for replacement parts until I find someone who knows more than me.