Jump to content
toyolien

Honest opinions on the Dancing Rider.

Recommended Posts

I get what you are saying my criticism of the T3 in fact is it’s dissimilarity to Carver in that you cannot steer the front forks or counter steer them. The single front wheel three wheeler is flawed in my opinion (despite my opinion of the Flamingo) a much better alternative is the Morgan style. Much more stable and doesn’t require tilting mechanisms at all. If I had better engineering skills I think it would be possible to make something with say an SRB front suspension and some form of trailing arm rear. I think I may have suggested this already!!

  • Like 1

Share this post


Link to post
Share on other sites

I agree on the flawed design of the fork not being able to steer.. it's like a bobble head just dangling in the direction the chassis is tilted.  I mean it's fine for a $100 chassis, it is fun to drive the thing casually but as my first post, I would not spend extra money on it.  I think my Dual Rider looks good per box art and is a fantastic conversation peice when I have visitors. 

I still like the older Willy and Billy figures though.  I know they are more challenging to paint properly, but that is the fun of building Tamiya models.

I can see myself buying another Flamingo to paint it in a desert camo scheme..

Share this post


Link to post
Share on other sites
13 minutes ago, Busdriver said:

I get what you are saying my criticism of the T3 in fact is it’s dissimilarity to Carver in that you cannot steer the front forks or counter steer them. The single front wheel three wheeler is flawed in my opinion (despite my opinion of the Flamingo) a much better alternative is the Morgan style. Much more stable and doesn’t require tilting mechanisms at all. If I had better engineering skills I think it would be possible to make something with say an SRB front suspension and some form of trailing arm rear. I think I may have suggested this already!!i

I had my local hobby dealer order my kit. And one of the first things he said after his initial awe of the concept wore off was 

“They should make a version with 2 wheels in front “ 

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, Dakratfink said:

They should make a version with 2 wheels in fron

Old school!!!!

Share this post


Link to post
Share on other sites

Offroad ready
kxhOZL3O3C-0EHHz1xxbHEVA8A7Qw_yd4AGmm6riYZZr7esyoFUbrFF5RsIcK3XNhrOMoKXt2Bv50KSvVYxU8xHDsWo8dfYayfOqh8sVe1jOSgaS8spskRcKEFomlQtfbKYKxEjQWDKki5BkLIH6BCOxO-tGW0n6SShgtk6Qh33lW4R83WyOhgJsvkGQCNCHxovbbqHuCMihBsaYeDthKKuUqW0jkSSv7LVDsQlsxlCBCg-xZWXPk6QtRc3jqPKV7XOPtcG6dHZ3UDYZiXUnV8RPT7Kr5m2An2SbUntoj7OtvippMd7uTzuglUwsoOv41Rg7bcww4r_R-UalUGI2xqg77MgFQTd8pJYhQrWatdCiFWcX9Dud5x1IuOQUzcgEpuzMFXcCOSG6iOF3K7ag6LRxiOm1WqeuFAIhwuxVpWS-zikCPW1MLX3ISEO4W8ZunL6ofukn60WTIMNc5Tf9BWeSvyOc-fbW_9Mw3_e_qxecFT-J2geqJvsyb7Rx26RS-hauxMdQr_Wv7ewH9mDd3Ad5nFtj2WKmLyjDnQ9KfleghUls6eQt8Izx4qmEzn3K-Cb0S3cx9PToYrAjPmUpHzZIJ-7I9xrGJ-wWj3VwLTi-lRhOzHEbyXhhkoirtV4gGDm2nt7u8G5zwlGmFyzKPoUgiZk7GrLNqiF-B0VusoSXXSVGhS6mTN_rAlzHBPCka_Oyai5kELhuMaW6dXGldAAk=w1343-h914-no?authuser=0

Little front suspension diy copy of the tamiya hopup
2R_5D3QVQ4AS5ydJCbPwY2KfUbT_vvQ9kxdHKkyOQra1rqs0XGTJqC4ASmx0t2hsPBTPPv55xs8iWOayCI-4PNaKz9JrSyLl0z7FeYepkn-Zw7ueMCWYiqqLm2zBPvuq0nE3CjONCjOBz_kfZ3XPk6Wq5ds4yJJnrmQin4VTAllxvo8bC_Bse_IjBz2PLH6j4FgoHq1qKwtZxsuBLnj1UlJjwUrfRYL8Oj87ISK-g3769JgyOWw8q7ytNMbC1QdIv7AxU7BUNGx432zjM6P822Jf-H4BIGcCUF3QgrJ84LKRtxxOeePCif0UJd1MztWAYAfVDT96HJrGybEZ1HK2bZMUQZ5YHyofE_mb5P6xLMI6cjtf7PihljZkiFAgOnPs2RBJ2oGh9inxYGdqSnPnD1T4_HouzVZPWNGwhl0TAcllEbzyD2lpaQhmWBoH-CLXQ_CIKtP9qly4HXQXulur2vf5O-jDRWCjbVPulLUNiIHhOAIdDBPf0dYEhjDPMC41xcCf_HUKJAMOBbgFioGDfl_TmW2SSiTqdWyw0JlN9dr1F7sAutrNJt7Z8lCCiyNF1d_4lO2gmKeuPdVqrOLZ5kZH9C1BBzhspvExh6rIs5Bo7m-5UmuqpiMv9RoV3qg3nx9YhQwGYc8W9kbCXdiKMnmquIaHA-iP-Nnf2ALHJG692dDc0KhjMBjXoOMlPj_EStX_kSHPzcg6zvcB14YstSrT=w1625-h914-no?authuser=0

Big improvement.

  • Haha 1

Share this post


Link to post
Share on other sites
10 hours ago, waterbok said:

Offroad ready
kxhOZL3O3C-0EHHz1xxbHEVA8A7Qw_yd4AGmm6riYZZr7esyoFUbrFF5RsIcK3XNhrOMoKXt2Bv50KSvVYxU8xHDsWo8dfYayfOqh8sVe1jOSgaS8spskRcKEFomlQtfbKYKxEjQWDKki5BkLIH6BCOxO-tGW0n6SShgtk6Qh33lW4R83WyOhgJsvkGQCNCHxovbbqHuCMihBsaYeDthKKuUqW0jkSSv7LVDsQlsxlCBCg-xZWXPk6QtRc3jqPKV7XOPtcG6dHZ3UDYZiXUnV8RPT7Kr5m2An2SbUntoj7OtvippMd7uTzuglUwsoOv41Rg7bcww4r_R-UalUGI2xqg77MgFQTd8pJYhQrWatdCiFWcX9Dud5x1IuOQUzcgEpuzMFXcCOSG6iOF3K7ag6LRxiOm1WqeuFAIhwuxVpWS-zikCPW1MLX3ISEO4W8ZunL6ofukn60WTIMNc5Tf9BWeSvyOc-fbW_9Mw3_e_qxecFT-J2geqJvsyb7Rx26RS-hauxMdQr_Wv7ewH9mDd3Ad5nFtj2WKmLyjDnQ9KfleghUls6eQt8Izx4qmEzn3K-Cb0S3cx9PToYrAjPmUpHzZIJ-7I9xrGJ-wWj3VwLTi-lRhOzHEbyXhhkoirtV4gGDm2nt7u8G5zwlGmFyzKPoUgiZk7GrLNqiF-B0VusoSXXSVGhS6mTN_rAlzHBPCka_Oyai5kELhuMaW6dXGldAAk=w1343-h914-no?authuser=0

Little front suspension diy copy of the tamiya hopup
2R_5D3QVQ4AS5ydJCbPwY2KfUbT_vvQ9kxdHKkyOQra1rqs0XGTJqC4ASmx0t2hsPBTPPv55xs8iWOayCI-4PNaKz9JrSyLl0z7FeYepkn-Zw7ueMCWYiqqLm2zBPvuq0nE3CjONCjOBz_kfZ3XPk6Wq5ds4yJJnrmQin4VTAllxvo8bC_Bse_IjBz2PLH6j4FgoHq1qKwtZxsuBLnj1UlJjwUrfRYL8Oj87ISK-g3769JgyOWw8q7ytNMbC1QdIv7AxU7BUNGx432zjM6P822Jf-H4BIGcCUF3QgrJ84LKRtxxOeePCif0UJd1MztWAYAfVDT96HJrGybEZ1HK2bZMUQZ5YHyofE_mb5P6xLMI6cjtf7PihljZkiFAgOnPs2RBJ2oGh9inxYGdqSnPnD1T4_HouzVZPWNGwhl0TAcllEbzyD2lpaQhmWBoH-CLXQ_CIKtP9qly4HXQXulur2vf5O-jDRWCjbVPulLUNiIHhOAIdDBPf0dYEhjDPMC41xcCf_HUKJAMOBbgFioGDfl_TmW2SSiTqdWyw0JlN9dr1F7sAutrNJt7Z8lCCiyNF1d_4lO2gmKeuPdVqrOLZ5kZH9C1BBzhspvExh6rIs5Bo7m-5UmuqpiMv9RoV3qg3nx9YhQwGYc8W9kbCXdiKMnmquIaHA-iP-Nnf2ALHJG692dDc0KhjMBjXoOMlPj_EStX_kSHPzcg6zvcB14YstSrT=w1625-h914-no?authuser=0

Big improvement.

Oh no pictures!!

Share this post


Link to post
Share on other sites
18 hours ago, Busdriver said:

I get what you are saying my criticism of the T3 in fact is it’s dissimilarity to Carver in that you cannot steer the front forks or counter steer them.

When riding a motorcycle it is perfectly possible (and very stupid, but I was young and therefore obviously immortal) to negotiate smooth B-road corners quite quickly, without touching the bars at all. Just by loading bodyweight through the footpegs.

I think the T3-01's rather crude suspension is more of a limiting factor. Though the hop-ups do seem to help a bit, a perfectly smooth surface helps more.

 

18 hours ago, Busdriver said:

If I had better engineering skills I think it would be possible to make something with say an SRB front suspension and some form of trailing arm rear. I think I may have suggested this already!!

That sounds completely awesome! I hope you try to do it!

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...