Zealot 397 Posted December 9, 2021 On 12/9/2021 at 6:26 AM, mtbkym01 said: No, it’s happening again, but this time with the BH WO, apparently the numbers ordered by SMS were way too low for the demand, but the 45th numbers were adequate. Time will tell I guess. Did Metro give a timeframe? No, no timeframe given, unfortunately. I wouldn't rule out Tamiya doing another run of the Blockhead as I personally believe they did more TF EVO kits because after being sold out everywhere, RCMart, RCJaz and ATees all have them in stock right now. RCMart even listed them as pre-order. I could be wrong, but it's hard to see a lost trove of kits from the original run being the reason they suddenly came back into stock. Share this post Link to post Share on other sites
mtbkym01 4008 Posted December 10, 2021 12 hours ago, Zealot said: No, no timeframe given, unfortunately. I wouldn't rule out Tamiya doing another run of the Blockhead as I personally believe they did more TF EVO kits because after being sold out everywhere, RCMart, RCJaz and ATees all have them in stock right now. RCMart even listed them as pre-order. I could be wrong, but it's hard to see a lost trove of kits from the original run being the reason they suddenly came back into stock. Yeah the BH should certainly continue being manufactured. There’s apparently a 2nd lot already ordered for us down under 1 Share this post Link to post Share on other sites
Wandy 1527 Posted December 10, 2021 My 934 arrived from RC Jaz yesterday. An impressive 3 day delivery time and no customs fees. Still paid a lot more than a UK-sourced kit but hey-ho. 1 Share this post Link to post Share on other sites
d4dawg 35 Posted December 10, 2021 20 hours ago, Zealot said: No, no timeframe given, unfortunately. I wouldn't rule out Tamiya doing another run of the Blockhead as I personally believe they did more TF EVO kits because after being sold out everywhere, RCMart, RCJaz and ATees all have them in stock right now. RCMart even listed them as pre-order. I could be wrong, but it's hard to see a lost trove of kits from the original run being the reason they suddenly came back into stock. That's good news regarding TF Evo. I've been waiting for my backorder from Tower since May. Sounds like there's some hope! Share this post Link to post Share on other sites
Bullitt3577 35 Posted December 16, 2021 Looks like Tower is starting to ship out the 934, just got a notification that the one I ordered 8/6 just shipped. 1 Share this post Link to post Share on other sites
d4dawg 35 Posted December 16, 2021 Good deal! I ordered on the same date. Haven’t seen any notification from Tower yet. Nothing on FedEx either. Fingers crossed! Share this post Link to post Share on other sites
marcod13 79 Posted December 16, 2021 Any of you waiting, don’t pay into scalpers or these ridiculous rates. I just paid 360 CAD tax in for my kit at my LHS. 2 Share this post Link to post Share on other sites
tamiya_1971 615 Posted December 16, 2021 I pre-ordered mine on 9/9, so I don't have much hope for this one being fulfilled. I got the Blockhead though, so 1 out of 2 pre-orders ain't bad. Share this post Link to post Share on other sites
middleagedgrup 218 Posted December 16, 2021 On 12/2/2021 at 10:04 AM, futureworks said: Is anyone also getting the limited release TA02 Carbon Chassis Conversion Set (47479)? On 12/2/2021 at 6:57 PM, Zealot said: 47479 available from them also. Look what landed yesterday... 2 Share this post Link to post Share on other sites
lucasan 28 Posted December 16, 2021 I thought the chassis was carbon fibre? Is it fiberglass? Share this post Link to post Share on other sites
TurboRSR 356 Posted December 16, 2021 3 hours ago, lucasan said: I thought the chassis was carbon fibre? Is it fiberglass? The kit chassis is made of FRP - Fiberglass Reinforced Plastic. Share this post Link to post Share on other sites
middleagedgrup 218 Posted December 16, 2021 On 12/3/2021 at 10:11 AM, Zealot said: Can someone explain the issue with the wheelbase being incorrect on this model? And does the carbon chassis remedy this? On 12/3/2021 at 10:27 AM, Juhunio said: If you do want to build it to 230mm you need some aftermarket carbon chassis plates. I used these and these and would recommend them to anybody You also need to either shorten the prop shaft or cut deeper recesses in the prop cups. I went with the latter and found it pretty straightforward On 12/3/2021 at 12:12 PM, Sgt.Speirs said: @Zealot: You can also modify the suspensions arms like it is described here: https://www.tamiyaclub.com/showroom_model.asp?cid=129718&id=9813 Turns out there is another way of doing this: one which doesn't involve cutting prop cups or modifying suspension arms...which is helpful for someone like me, cause I'd probably Dremel off a thumb trying the former or irreparably break something attempting the latter! Custom carbon propshaft, 6mm shorter than standard, complete with carbon cups. Combined with the chassis plates and shock towers identified by @Juhunio above, this should be a tidy solution. Shout out to @DeadMeat666 for the introduction. 1 2 Share this post Link to post Share on other sites
middleagedgrup 218 Posted December 17, 2021 No link to share, but can give you the contact details of the chap who made it (he's confirmed he's happy to help others too). If anyone wants details then just send me a PM and I'll reply - don't want to share personal contact details on a public forum. 1 Share this post Link to post Share on other sites
Sprocket 52 Posted December 17, 2021 On 12/15/2021 at 7:11 PM, Bullitt3577 said: Looks like Tower is starting to ship out the 934, just got a notification that the one I ordered 8/6 just shipped. Ordered 7 days later, not on the list Share this post Link to post Share on other sites
Bullitt3577 35 Posted December 18, 2021 2 hours ago, Sprocket said: Ordered 7 days later, not on the list I’m guessing they sold wayyy more than they initially ordered! I was supposed to get it today, but Fed ex has it delayed now!! Share this post Link to post Share on other sites
Sprocket 52 Posted December 18, 2021 I’m just going to wait it out. If I get one from TH cool. If not, I am not going to spend 2-3x to pick one up. I’ll be saving up for an Optima Mid instead 1 Share this post Link to post Share on other sites
lucasan 28 Posted December 18, 2021 19 hours ago, Sprocket said: Ordered 7 days later, not on the list what list are you talking about Sprocket? Share this post Link to post Share on other sites
JamesM3081 27 Posted December 18, 2021 Glad see folks are receiving the Porsche 45th kit. Looks like I may also not make the Tower Hobbies cut. Ordered it on 8/6 but haven't received anything yet. I did also preorder the TA02 Carbon Conversion set so hopefully that makes it over. Share this post Link to post Share on other sites
Bullitt3577 35 Posted December 19, 2021 3 hours ago, JamesM3081 said: Glad see folks are receiving the Porsche 45th kit. Looks like I may also not make the Tower Hobbies cut. Ordered it on 8/6 but haven't received anything yet. I did also preorder the TA02 Carbon Conversion set so hopefully that makes it over. Just got it today, was supposed to be delivered yesterday but Fed ex was delayed to today. I placed my order at a little before 1am on 8/6, wonder what time you placed yours James? Share this post Link to post Share on other sites
JamesM3081 27 Posted December 19, 2021 41 minutes ago, Bullitt3577 said: Just got it today, was supposed to be delivered yesterday but Fed ex was delayed to today. I placed my order at a little before 1am on 8/6, wonder what time you placed yours James? That is great to hear Bullitt! Glad you received yours despite the slight delay. I'm thinking I didn't make the cut since I didn't place my order till 5:30PM It's all good though. Just wondering when TH will contact me now. I'm thinking of pinging them by the end of the month if I don't receive any communication from them. Enjoy yours! Share this post Link to post Share on other sites
Sprocket 52 Posted December 19, 2021 12 hours ago, lucasan said: what list are you talking about Sprocket? I had placed an order for the 934 with Tower Hobbies, however they had not received enough kits to cover my order Share this post Link to post Share on other sites
lucasan 28 Posted December 19, 2021 7 hours ago, Sprocket said: I had placed an order for the 934 with Tower Hobbies, however they had not received enough kits to cover my order So if I ordered a month ago from Tower, I will most certainly not get mine I guess. Share this post Link to post Share on other sites
Bullitt3577 35 Posted December 19, 2021 5 hours ago, lucasan said: So if I ordered a month ago from Tower, I will most certainly not get mine I guess. Hopefully you’ll get yours on the next shipment? 1 Share this post Link to post Share on other sites
lucasan 28 Posted December 20, 2021 19 hours ago, Bullitt3577 said: Hopefully you’ll get yours on the next shipment? Fingers crossed. I missed the boat on the the 30th and 35th. did get the 40th but it was nothing like the 45th. Share this post Link to post Share on other sites