70's Baja Racer Project Part II
A little progess on this project, or a little change. This is final design. White aluminum wheels and tires will stay. Maybe front bumper will change. Now I will start with cockpit, driver and electric. Maybe a radio box or something.
Comments welcome.
If you liked those pictures, you should see these...
70^s Baja Racer Project
Comments
KEV THE REV
Very nice work , the rear end especially looks excellent - dare I say better than SRB stock
Origineelreclamebord
This looks amazing! If I may say so I think the rear end would benefit from becoming slightly narrower
That said, this easily looks better than the stock RR!
TamTom
I know the rear end could be narrower. I am searching for solutions to narrow it. But as a start I used a standard Scorpion rear end. I will have to make a new bottom plate to mount the trailing arms narrower and then to find dog bones that fit. I enclosed some comparison shots. It is not much wider but as the tires are very narrow it looks even more wieder.
RACECRAFTERS
Looks really good! Use shorter stub axles and wide hexs on the rear -or alternately- use Junfac +13mm Wheel widners
Loving what you have done! 
RACECRAFTERS
Oops! Nearly forgot, you will have to use Frog/Brat stub axles if you use the Junfac wideners. You should not need to fabricate a new bottom plate. Good luck!
TamTom
@rececrafters
I need to narrow the bottom plate. The rear end is a standard TA03 pin driven axle. The only way to get it narrower is, to make a new bottom plate with narrower holes to mount the trailing arms closer to center. And then I need short dog bone type shafts.
tamiyaluvr
Wow!!! Best example of a custom Buggy Champ here on TC IMHO
skywhelp
very nice indeed top work on the body.
Want to leave a comment?