Adjustable bodylift for Pajero

Hi all, just did this on my Pajero and thought I could share it with you all. There are already a couple of 'how to lift your Pajero' here on TC, but for me the body got too high by lifting it with different rear shock and so on, so I came up with this.

1: Use 2 x bushings from the kit to lift the front bodymount, and tighten them up with some longer screws.

2: Cut the rear bodymounts as showed in picture 3.

3: Use some flat metal (I used brass) and bend it around the mount as showed in picture 4. Then drill two 2,5mm holes through and use 2 x 3mm screws to bolt the metal to the plastic.

4: Drill a 2mm hole in the center of the bodymount tip and then attach it to the 'post'.

By doing this I can now adjust the height by using different spacers in front and the other holes I drilled in the rear bodymounts.