£2 Tip Find - Clodbuster!
Found this rather sorry looking Clod down our local council 'Recycling facility'. Its bodyshell is badly damaged & all the tyres were perished but I could see that structurally it seemed sound. The Clodbuster (along with the Egress) Was one of my dream Tamiya R/C models when I was a kid, so have been pretty excited about re-building this one :-) Its this model that got me looking on the net for parts & eventually to this site... & found out that my junkyard Clod has the more desirable 'Bow-tie' Grill & 'Chevy' tailgate. I have since sourced a number of new parts including; Shell, Chrome 'J' parts,Tyres, a set of springs, Ball race set & Ali anti-rotation brackets. The truck is currently being re-built after diss-assembly & cleaning/polishing every part. I have also made some reinforcing plates - following the design of the items now used in the SuperClod. The plan is to use & enjoy this beast & i've got a pair of ex-race 19 turn motors & a Tekin speedo to use. Will update this with some finished pics when its done ;-)
Edited to add new pictures. Finished off the main build of the truck over the weekend, just got to hook up the electrics, paint the shell & glue on the tyres. The main bulk of the truck is in surprisingly good condition despite how badly beaten-up the old shell was - despite the usual odd scratch, she's come up a treat!
If you liked those pictures, you should see these...
Finally finished! (well almost) Took the opportunity to take some suitably festive pics
Comments
Connor
Good find, will be a fun project - ENJOY!!!
Henk4Focus
They can never be beyond repair. My fav Tamiya by far. Lucky to have the Bowtie grille and tailgate.
mackerb03
Good find
jeffy
Nice find and did you find the cylinder head and the bike there also P.S isn't that an old 8valve VW head???
DerbyDan
Ha ha - jeffy, I didn't get the bike or cylinder head from the tip - however you do seem some surprisingly nice bikes down there sometimes! You're right about the cylinder head its a spare I have for this; [Click here] The plan is to port & polish it, fit a re-ground cam I have for it & swap it over onto the car with bike carbs :-D
Want to leave a comment?